Home Forums Installation If Neolith is reinforced with fiberglass mesh on the back, should I use the same adhesive?

This debate contains 0 responses, 1 message and was updated admin hace 2 años, 3 meses.

Seeing 1 publication (of a total of 1)
  • Author
    Publications
  • #18653

    admin
    Code manager

    Yes, but if you wish to improve the adhesion of the Neolith material with fiberglass reinforcement above the result obtained on tests carried out by the adhesive supplier, applying a water-compatible adhesion enhancement agent for compact, non-absorbent supports is recommended.

    Apply the adhesion enhancement product directly to the back of the Neolith slab by applying a thin film, preferably with a sponge roller. Repeat the operation crosswise to the initial application.

    Wait for final laying until it has dried as per the process or product recommended in this guide.

Seeing 1 publication (of a total of 1)

You must be registered in order to respond to this debate.